The Eleaf iJust NexGen is a compact all-in-one style device that features a built in 3000mAh battery and 2ml e liquid capacity (expandable to 4ml). It uses Eleaf HW coils giving you four options for coil type. It has a very easy to use retractable top making it a breeze for filling. There is also an adjustable airflow control ring around the top hardware base.
The power button lights up with a different color depending on the remaining battery life to let you know when to recharge.
Inside the Eleaf iJust NexGen box:
1 iJust NexGen
2 HW1 0.2ohm Coil Heads – Rated for 40-80W (Best 50-65W)
1 Extra Glass Tube (for 4ml capacity)
1 Extender Pipe (for 4ml capacity)
1 USB Charging Cable
1 User Manual
Extra O Rings
Eleaf iJust NexGen Specs
Height: 4 5/8″
E-liquid capacity: 2ml (extendable to 4ml)
Battery capacity: 3000mAh
Output wattage: max 50W
Resistance range: 0.15 ohm – 3 ohm
15 second cutoff, short circuit protection, low voltage protection, resistance detection
Convenient Retractable Top Filling System Adjustable Airflow Ring
Color Coded Charge Levels
All-in-one Design with Internal 3000mAh Battery. The tank section can be detached and reassembled for easy cleaning and maintenance.
TIPS AND RECOMMENDATIONS
Eleaf iJust NexGen user manual
Press the power button 5 times in quick succession within 2 seconds, and the power light flashes 5 times to show the device is powered on. In the same way, it can also be turned off. Make sure device is powered off before putting away in pocket or purse.
We strongly suggest using 6mg e liquid or lower with the atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.
Before using a new coil, prime it first by dropping a few drops of e liquid directly onto the cotton and let sit for several minutes to prevent dry hits at start up.