The Eleaf iStick Pico 25 features a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function all in a compact, stylish yet powerful package. The iStick Pico 25 supports VW/Bypass/TC modes, and includes Ni,Ti,SS in TC mode. Powered by a single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter.
The ELLO atomizer has a 2ml juice capacity however this kit comes with an extra glass tube and extender that can transform into 4ml capacity, retractable top for easy filling, adjustable airflow system, two drip tip types and pairs with the iStick Pico 25 perfectly in terms of both appearance and performance. The ELLO comes with a pre-installed HW1 Single Cylinder SS316L 0.2ohm atomizer head that is designed for variable wattage or SS316L TC mode. It also includes and extra HW2 Dual Cylinder Kanthal 0.3ohm atomizer head that is designed for variable wattage.
Inside the Eleaf iStick Pico 25 with ELLO Box: 1 iStick Pico 25 Eleaf iStick Pico 25 Specs: Dimensions: 2-3/4″ x 1-7/8″ x 15/16″ (Including Battery Cap)
1 ELLO Atomizer
1 HW1 Single-Cylinder Coil Head (pre-installed) 0.2Ω – Rated for 40-80W (best 50-65W)
1 HW2 Dual-Cylinder Coil Head 0.3Ω – Rated for 30-70W (best 45-60W)
1 Quick Charge USB Cable
1 Extra Glass Tube (for 4ml capacity)
1 Extender Pipe (for 4ml capacity)
1 Extra Wide Bore Drip Tip
2 User Manuals
Extra O Rings
Compatible with 25mm tanks and smaller
Operating Wattage: 1.0 – 85.0 W
Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Modes
Temperature Control: 100 – 315C / 220 – 600 F
Bypass (Direct Output Voltage) Mode
Resistance: 0.1 – 3.5 ohm in Variable Wattage/Bypass Mode
Resistance: 0.05 – 1.5 ohm in Temperature Control Mode
Hidden Adjustment Buttons located on the Bottom of the Device
0.91″ OLED Display Screen
Requires (1) High Amp 18650 Battery (Sold Separately)
Side Micro USB Charging Port
Maximum Charging Current: 2A
Dual Circuit Protection
Inside the Eleaf iStick Pico 25 with ELLO Box:
1 iStick Pico 25
Eleaf iStick Pico 25 Specs:
Dimensions: 2-3/4″ x 1-7/8″ x 15/16″ (Including Battery Cap)
Big 0.91-Inch Screen with 3 Optional Interfaces The iStick Pico 25 can handle various tanks up to 25mm diameter
Convenient Retractable Top Fill System HW Coils for Big Clouds and Optimal Flavor
Replaceable 18650 Battery Detachable Structure for Easy Cleaning
Tips and Recommendations
Upgrade your firmware at Eleafworld
To replace the drip tip firmly grab and pull up
We strongly suggest using 6mg e liquid or lower with the atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.
Before using a new coil, prime it first by dropping a few drops of e liquid directly onto the cotton and let sit for several minutes to prevent dry hits at start up.
The ELLO mini sub ohm tank uses sub ohm resistance coils and is designed for sub ohming. Sub ohm vaping is dangerous when used with the wrong device. Only use this tank with a mechanical mod or a regulated mod capable of firing an atomizer of 0.5ohm or lower. You must be sure that your mod AND batteries can handle sub ohm coils. If you’re using a regulated mod, make sure it can handle the amps. For mechanical mod users, please use 20 amp batteries or higher. Use the OHMS LAW CALCULATOR, check your amps. Be safe!
DO NOT use the ELLO tank with eGo style batteries. You will need a battery capable of producing more power than traditional eGo devices.
Please Note: The Ello tank is not covered by warranty and cannot be exchanged.