The KangerTech Genitank Mini is a smaller version of the popular Genitank. The GeniTank Mini is made from plated copper and features a modular design that can be fully disassembled for cleaning and replacement of parts. It is 510 threaded and will fit on any eGo threaded devices and with an ego adapter can also fit on mods. Most 510 style drip tips will fit the GeniTank Mini. Gaskets on drip tip, coil head and base ensure no leaking.
The adjustable air flow dial on the base will allow you to fine tune the draw to your personal preference.
Dual coil heads are interchangeable with:
Mini Protank 3
AEROTank (all versions)
Genitanks (all versions)
Emow and Mow (all versions)
1 KangerTech GeniTank
1 Dual coil coil head installed (1.5ohm / 3.6 – 4.6V)
GeniTank Mini Specs
Tank capacity: 1.5ml
Pyrex glass tank (allows you to use many gourmet e liquid flavors without cracking tank)
Airflow control valve with 5 air holes
Tips and Recommendations
When you first receive your GeniTank Mini, unscrew the bottom base and make sure the coil head is screwed in all the way and then you are ready to fill with e-liquid.
When unfastening the base which holds the coil head to refill, the seals are temporarily broken and liquid will leak from the mouthpiece or escape into the center tube. Always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base.
When refilling the tank with e liquid, tilt the tank slightly and drop the e liquid down the side to prevent getting any e liquid into the center tube. When nearing the bar near the top where the coil head screws into, hold tank up straight to make sure e liquid is not going to spill over into the center tube.
If you hear gurgling noises or leaks, this is a sign that e liquid has found its way into the metal tube in the center of the tank, ridding the center tube of liquid will resolve the issue. To do so without emptying the tank, remove the GeniTank Mini from the battery, wrap a cloth or tissue around the base end of the tank and blow through the mouthpiece.
The coil head of the GeniTank Mini can become loose when unscrewing the tube or base. Always secure the coil head before reinstalling the base of the tank.
It is normal to find a small amount of liquid in the battery contact area when removing the GeniTank Mini; this is a good time to clean the area of the battery where the tank screws onto with a q-tip or kleenex to get out any gunk.