This Vision Spinner I Aspire K1 starter kit includes:
1 Vision Spinner I 1300 mAh variable voltage battery
1 Authentic Aspire K1 glassomizer
2 extra Aspire BVC coil heads (1.8ohm)
1 800mA USB charger for faster charging times
The Vision Spinner I is a variable voltage battery that allows you to adjust the voltage output from 3.3v up to 4.8v by spinning a dial at the bottom. The spinner has markings to indicate approximate output voltages at 3.3, 3.8, 4.3, and 4.8 volts with options for .1 increments in between each marked number. Simply turn the dial to your desired vaping voltage. The dial is easy to read with a red mark to indicate what voltage you are at.
This feature helps you to find the perfect setting to use with various coil head resistances and e liquid types to get that perfect vape.
This starter kit comes with an authentic Aspire K1 glassomizer. The Aspire K1 glassomizer is made of Pyrex glass and a stainless steel removable drip tip. It comes with a pre-installed Aspire bottom vertical coil (BVC) atomizer. You can also use BDC coil heads if you prefer. The high-end design of the clear glass and stainless steel make this tank a high quality product. It is small and compact and will look good on any battery. It can easily become your go to tank for all your vaping.
Vision Spinner I 1300 mAh Battery Specs
– Working voltage: variable 3.3v-4.8v
– Battery capacity: 1300mAh
– Battery life per charge: 13 hours or more
– Charge time: 3 hours (for fully drained battery)
– Length: 4 3/16 in.
– Diameter: 16mm
Aspire K1 Glassomizer Specs
– Capacity: 1.5ml
– Diameter: 14.55mm
– Length: 72mm = 2 3/4″
Vision Spinner I 1300mAh Battery Functions
5-click on/off function helps prevent unintentional use. Click the button rapidly 5 times in a row to turn the battery on or off.
Short Circuit Protection: If a short circuit happens, the battery will shut down and not function again until short circuit is removed.
Safety Cutoff/Atomizer Protection: If you press the button for more than 15 seconds, the power button will flash 3 times and the battery will be locked until the next press.
Low Voltage Protection: When battery is fully charged its highest output can be 4.8v and as the battery drains, the voltage will decrease and shut off if reaches below 3.3v.
Tips and Recommendations
We suggest you to start at 3.3v and increase the voltage gradually until you find the right voltage for your tank and coil system and are happy with the vapor volume. If you get a burnt taste turn the voltage down and/or switch to a higher ohm atomizer.
Only move the red marking in between the 3.3v – 4.8v markings along the scale do not try to spin the dial counterclockwise past the 3.3v mark and likewise for moving clockwise past the 4.8v mark, it may damage the battery if it’s being pushed too forcefully
When the battery is fully charged the USB light turns green, please remove from charger, this will extend the life of the battery.